ATTENTION:
BEFORE YOU READ THE ABSTRACT OR CHAPTER ONE OF THE PROJECT TOPIC BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!
INFORMATION:
YOU CAN GET THE COMPLETE PROJECT OF THE TOPIC BELOW. THE FULL PROJECT COSTS N5,000 ONLY. THE FULL INFORMATION ON HOW TO PAY AND GET THE COMPLETE PROJECT IS AT THE BOTTOM OF THIS PAGE. OR YOU CAN CALL: 08068231953, 08168759420
WHATSAPP US ON 08137701720
ANTENNA DESIGN FOR UWB NOISE COMMUNICATION AND RADAR SYSTEMS
ABSTRACT
This work discusses antenna design for uwb noise communication and radar systems. This project has focused on the aspect of UWB antenna design for the impulse based UWB radar which is built on CMOS technology. The design of new UWB antenna faces some challenges. The antenna should be compact, preferably conformal, low cost for manufacture, and have good electrical performance, such as good matching, directional radiation performance over a wide band, good time response, etc. Keeping these goals in mind a compact and directional antipodal Vivaldi antenna was built. The antenna radiating structure is in the form of two exponentially tapered arms that lie on the opposite sides of the substrate. The antenna operates over the frequency band from 2.7 GHz to more than 12 GHz. It exhibits a directive radiation performance with a peak gain which is between 3.2dBi and 10.2dBi in the specified band. The time domain performance of the antenna shows negligible distortion of the pulse which makes it suitable to use with impulse based UWB radar. The antenna has linear phase response over the entire UWB frequency range and hence constant group delay which is vital for transmission and reception of sub-nanosecond pulses. Due to its planar profile, physically compact size, wide impedance bandwidth, directive performance over a wide bandwidth antipodal Vivaldi antenna is a good candidate for use with Novelda UWB radar chip and other UWB integrated circuits and portable electronics. The antenna is being used for ranging, one and two dimensional tracking along with Novelda R2A UWB radar chip.
HOW TO RECEIVE PROJECT MATERIAL(S)
After paying the appropriate amount (#5,000) into our bank Account below, send the following information to
08068231953 or 08168759420
(1) Your project topics
(2) Email Address
(3) Payment Name
(4) Teller Number
We will send your material(s) after we receive bank alert
BANK ACCOUNTS
Account Name: AMUTAH DANIEL CHUKWUDI
Account Number: 0046579864
Bank: GTBank.
OR
Account Name: AMUTAH DANIEL CHUKWUDI
Account Number: 3139283609
Bank: FIRST BANK
FOR MORE INFORMATION, CALL:
08068231953 or 08168759420