ATTENTION:
BEFORE YOU READ THE ABSTRACT OR CHAPTER ONE OF THE PROJECT TOPICS BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!
INFORMATION:
YOU CAN GET THE COMPLETE PROJECT OF THE TOPIC BELOW. THE FULL PROJECT COST N5,000 ONLY. THE FULL INFORMATION ON HOW TO PAY AND GET THE COMPLETE PROJECT IS AT THE BOTTOM OF THIS PAGE. OR
YOU CAN CALL: 08068231953, 08137701720
WHATSAPP US ON: 08137701720
DESIGN AND CONSTRUCTION OF A COOLING SYSTEM FOR A CURRENT FOOD EXTRUDER
ABSTRACT
One of the oldest techniques used by most businesses to transform paste raw material into a finished and desired shape based on their extrusion equipment is food extrusion. Food processing technology’s extrusion technique incorporates several unit activities, including cooking, kneading, shearing, shaping, and forming. Extruders are the devices that push the mixture through the die, and the mixture is referred to as extrudate. The extruder comprises a sizable revolving screw that is firmly fitted with a die that is a stationary barrel at the other end. This idea was motivated by the necessity to regulate the heat produced by a cooking extruder’s frictional dissipation on crops since different crops produce heat at varying temperatures and rates for each vary. A cooling system is necessary to actualize the desired final product by managing the temperature created during the extrusion process, which can prevent burns and puffing of the raw materials and finished goods. The radiator, heat exchanger, reservoir, water pump, fan hose, and distribution pipes are among the cooling system’s components.
TABLE OF CONTENT
Title page- – – – – – – – – i
Approval page – – – – – – – -ii
Dedication – – – – – – – – -iii
Acknowledgement – – – – – – – -iv
Abstract – – – – – – – – – -v
Table of content – – – – – – – -vi
CHAPTER ONE
INTRODUCTION – – – – – – – -1
1.0 Background of the study – – – – -1
1.1 Statement of the problem – – – – -5
1.2 Purpose of the study – – – – – -6
1.3 Significance of the study – – – – -8
1.4 Research questions – – – – – -9
1.5 Scope of the study – – – – – – -10
CHAPTER TWO
LITERATURE REVIEW – – – – – – -11
CHAPTER THREE
Research methodology – – – – – – -39
Design of study – – – – – – – -40
Area of study – – – – – – – – -40
Population of the study – – – – – – -41
Sample and sampling techniques – – – – -41
An instrument for data collection – – – – -41
Method of data collection – – – – – -42
Method of data analysis – – – – – – -43
CHAPTER FOUR
Presentation, analysis, and interpretation of data – -48
Discussion of findings – – – – – – -56
CHAPTER FIVE
Summary of findings – – – – – – -60
Conclusion – – – – – – – – -61
Recommendations – – – – – – – -62
Suggestions for further research – – – – -64
References – – – – – – – – -65
Appendix I – – – – — – – – -68
Questionnaire. – – – – – – – -69
HOW TO RECEIVE PROJECT MATERICAL(S)
After paying the appropriate amount (#5,000) into our bank Account below, send the following information to
08068231953 or 08168759420
(1) Your project topics
(2) Email Address
(3) Payment Name
(4) Teller Number
We will send your material(s) after we receive bank alert
BANK ACCOUNTS
Account Name: AMUTAH DANIEL CHUKWUDI
Account Number: 0046579864
Bank: GTBank.
OR
Account Name: AMUTAH DANIEL CHUKWUDI
Account Number: 3139283609
Bank: FIRST BANK
FOR MORE INFORMATION, CALL:
08068231953 or 08168759420