ELECTRICAL ENGINEERING PROJECT TOPICS AND MATERIALS

ELECTRICAL ENGINEERING PROJECT TOPICS AND MATERIALS

ATTENTION:

BEFORE YOU READ THE PROJECT TOPICS BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

NOTE:

WE WILL SEND YOU THE ABSTRACT, TABLE OF CONTENT AND CHAPTER ONE OF YOUR APPROVED TOPIC FOR FREE.

CHOOSE FROM THE LIST OF TOPICS BELOW. SEND YOUR EMAIL ADDRESS AND THE APPROVED PROJECT TOPIC TO ANY OF THESE NUMBERS-08068231953, 08168759420

WE WILL THEN SEND THE ABSTRACT, TABLE OF CONTENT AND CHAPTER ONE FOR FREE

NOTE ALSO:

WE CAN ALSO DEVELOP THE FULL PROJECT WORK

CALL: 08068231953, 08168759420

ELECTRICAL ENGINEERING PROJECT TOPICS AND MATERIALS

  1. Design and implementation of an android based automatic sector antenna positioning using atmega328p. (case study: namuyenje site in mokono)
  2. Comparative analysis of practical skills acquisition in electrical/electronic engineering training program in accra and kumasi polytechnics in ghana.
  3. Mixed h_2/h_∞ and robust predictive to control wheeled mobile robots with time delay
  4. Buildings maintenance cost
  5. Impact of electronic payment system in the nigerian financial institution (a case study of first bank nigeria plc)
  6. Design and construction of 2kva inverter
  7. Design of an electronic siren circuit
  8. Design, development and testing of a liquefied petroleum gas powered tomato dryer with water energy stotage
  9. Nitrogen doping effect on tin-selenium thin films for phase change memory applications
  10. Contingency and security analysis for power system network . Case study _ nec grid
  11. Automation of waste segregation via sensors by using plc
  12. An assessment of embedded power generation in nigeria
  13. Greenhouse wireless monitoring and control system based on sensor network
  14. A comparison between proportional-integral-derivative and fuzzy controllers for water tank
  15. Reliability centered maintenance (rcm) for asset management in electric power distribution system’
  16. Reliability centered maintenance (rcm) for asset management in electric power distribution system
  17. Design and construction of an automated street lighting system
  18. Reliability evaluation of secondary distribution system in nigeria: a case study of ayetoro 1 substation, aguda, lagos state
  19. Overcoming barriers to new learning technologies in a university setting: the case of covenant university
  20. Application of common management information protocol (cmip) in atm network bandwidth allocation system
  21. A co-ordination study of protection system for mala oil fields in block 5a
  22. An intelligent load shedding system application in sudan national grid
  23. Evaluation and improvement of power quality on distribution network: a case study of covenant university, ota
  24. A new voltage stability index for predicting voltage collapse in electrical power system networks
  25. Optimizing of dc motor speed using pid controller and grey prediction algorithm
  26. Design and implementation of printed circuit board computer numerical control machine with path planning algorithm
  27. Assessment and upgrading of scada system for petroleum pipelines
  28. Maximum power point tracker of wind energy generation systems
  29. Performance evaluation of ant colony optimization for routing in wireless sensor networks
  30. The optimization of generating plants in a microgrid: the covenant university electric power network experience
  31. Reliability evaluation of secondary distribution system in nigeria: a case study of ayetoro 1 substation, aguda, lagos state
  32. The electrical engineer and the community a clarion call for sensitivity and long term investment
  33. Derivation of the bandwidth resource allocation in an atm-based network
  34. Short term electrical load forecasting using fuzzy logic
  35. Battery charging control for wind energy generation system
  36. Load frequency control in multi machine systems using pid controller
  37. Performance assessment of thyristor controlled series compensator (tcsc) in sudanese national grid
  38. Performance compration of equalization techniques in downlink long term evolution
  39. Development of plc program and monitoring system for robotic arm
  40. Globalization, energy, education and poverty alleviation: prospects & challenges for developing nations
  41. Reliability centered maintenance (rcm) for asset management in electric power distribution system
  42. Dual axis sun tracking system using a microcontroller and a stepper motor
  43. Development of nonlinear control schemes for electric power system stabilization
  44. Nero-fuzzy controller design for permanent magnet dc motor
  45. Positioning the electric power sector for electricity sufficiency in nigeria to meet up with vision 2020.
  46. An intrusion detection system using artificial neural network based on intrusion behavior
  47. Positioning the electric power sector for electricity sufficiency in nigeria to meet up with vision 2020..
  48. Positioning the electric power sector for electricity sufficiency in nigeria to meet up with vision 2020.
  49. Boiler control design using fuzzy logic
  50. Wireless electrical power transfer for charging low power appliances
  51. Nigeria electricity industry: issues, challenges and solutions
  52. A fault detection and protection scheme for a 200 mva transformer using fuzzy logic
  53. Contingency analysis in presence of svc controller of sudan national grid for electricity
  54. Cadmium chloride thin films: hydration-dehydration
  55. Gsm based communication-sensor (commsense) system
  56. The relevance of load following capability of nuclear power plant for the south african grid
  57. An electrical power system for cubesats
  58. Active object recognition for 2d and 3d applications
  59. Investigation into the use of the microsoft kinect and the hough transform for mobile robotics
  60. A 3-phase z-source inverter driven by a novel hybrid switching algorithm
  61. Ultrasonic spectroscopy of liquid filled piezoelectric tube
  62. Multivariable control of a nonlinear process output prioritisation by error redistribution
  63. Fractal image compression and the self-affinity assumption: a stochastic signal modelling perspective
  64. Novel low cost synchronisation network for spread spectrulyi systelvis
  65. Damping of electromechanical oscillations using power system stabilizers
  66. 3-phase gate-turn off thyristor inverter
  67. Electron beam decomposition of cdci2
  68. A current source inverter-fed constant air gap flux controlled squirrel cage induction motor drive.
  69. Natural variable modeling and performance of interior permanent magnet motor with concentrated and distributed windings
  70. A fault detection and protection scheme for a 200 mva transformer using fuzzy logic
  71. A modified linear contribution factor model for improvement of reliability indices of electrical distribution systems
  72. Sliding mode direct torque control of three phase induction machine applicable in electric vehicles
  73. Effects of selected roofing materials on air navigation signal propagation
  74. Development of countermeasures against some internet security threats
  75. Identifying permeability controls by use of gravity method in menengai geothermal field, kenya
  76. Load optimization by steam and blade washing in a flash type power plant-a case study of olkaria ii geothermal power plant
  77. Improved energy efficiency using facts-device technique: a case study of ogui-enugu power distribution network.
  78. High power loss reduction in enugu electrical distribution systems using heuristic technique for capacitor placement.
  79. Performance characteristics of a transfer field machine operating in the asynchronous mode
  80. Automated energy meter reading by using radio frequency technology
  81. Modeling h2s dispersion from proposed menengai geothermal powerplant
  82. A case study of three dimensional inversions of electrical resistivity to image geothermal system in korosi geothermal prospect-kenya
  83. Evaluation of potentials for renewable energy in the power system in sudan
  84. Dynamic loss of load performance of an autonomous self-excited induction generator (seig)
  85. Performance evaluation of channel estimation and detection algorithms for 5g massive mimo system
  86. Some methodologies for facts controllers
  87. Construction and test of a delta modulated buck type 3 phase converter
  88. Design of digital filters using incremental changes in processing
  89. Design of adaptive control schemes for an industrial robot arm
  90. Correlation of load-point reliability indices with power system fault levels
  91. Dynamic modelling and implementation of split-phase induction machine
  92. Synthesis of a hysteresis motor
  93. The role of technicians and craftsmen in a developing country
  94. Investigation and simulation of a micro hydro, solar and biomas hybrid energy system for off-grid locations in nigeria
  95. Efficient spectrum-handoff schemes for cognitive radio networks
  96. Post graduate professional experience in electronic and electrical engineering
  97. Evaluating the performance of the unified power flow controller (upfc) on fault current limitation in the nigerian 330kv power network
  98. Sliding mode direct torque control of three phase induction machine applicable in electric vehicles
  99. Modeling modelingand parameter extraction of a and parameter extraction of a 214 mva turbo- 214 mva turbo-generator driven by dc generator driven by dc motors during off- motors during off-li
  100. A hybrid modulation scheme for cascaded h-bridge inverter cells
  101. Dynamic analysis of induction machine connected to infinite bus-bar
  102. A generalized solution to the thin-wire elliptical-cylindrical helical-beam antenna problem.work
  103. Short circuit modelling and parameter extraction of a turbo generator
  104. Short circuit modelling and parameter extraction of a turbo generator
  105. E beam induced decomposition of inorganic solids
  106. Electric vehicle charging infrastructure with three-way automatic switch
  107. Privacy-by-design for internet of things(iot): implementing user autonomous options in a smart home scenario
  108. A low cost anti-theft tracking system for electric vehicles
  109. Automatic three phase changer
  110. Store management system to jit
  111. Optimal location and sizing of distributed generation in distribution network using adaptive neuro-fuzzy logic technique
  112. Impact of weather variables on electricity power demand forecast using fuzzy logic technique
  113. Assessing the benefits and challenges of distributed generation in nigeria power distribution network
  114. Speed control of marine diesel engine self-tuning based on fuzzy pid control and genetic algorithm pid
  115. Square wave to sinounsidal wave form
  116. Microstructurally engineered p-layers for obtaining high open-circuit voltages in a-si:h n-i-p solar cells
  117. Maximization of the open circuit voltage for a-si:h n-i-p solar cells by incorporation of protocrystalline si:h p-type layers
  118. Correlation of light-induced changes in a-si:h films with characteristics of corresponding solar cells
  119. Photovoltaics — a path to sustainable futures
  120. Absence of carrier recombination associated with the defect pool model in a-si:h i-layers: evidence from current-voltage characteristics on p-i-n and n-i-p solar cells
  121. Light induced defect states in hydrogenated amorphous silicon centered around 1.05 and 1.2ev from the conduction band edge
  122. Numerical simulation of the direct application of compound parabolic concentrators to a single effect basin solar still
  123. 3d-mapping optimization of embodied energy of transportation
  124. Reducing greenhouse gas emissions by inducing energy conservation and distributed generation from elimination of electric utility customer charges
  125. Increasing pv velocity by reinvesting the nuclear energy insurance subsidy into large scale solar photovoltaic production
  126. Expanded microchannel heat exchanger: design, fabrication and preliminary experimental test
  127. Optimizing limited solar roof access by exergy analysis of solar thermal, photovoltaic, and hybrid photovoltaic thermal systems
  128. Effects of spectral albedo on solar photovoltaic devices
  129. Simulations of greenhouse gas emission reductions from low-cost hybrid solar photovoltaic and cogeneration systems for new communities
  130. Mobile open-source solar-powered 3-d printers for distributed manufacturing in off-grid communities
  131. Performance of u.s. hybrid distributed energy systems: solar photovoltaic, battery and combined heat and power
  132. Double amorphous silicon-carbide p-layer structures producing highly stabilized pin-type protocrystalline silicon multilayer solar cells
  133. Light-induced defect states in hydrogenated amorphous silicon centered around 1.0 and 1.2 ev from the conduction band edge
  134. Photovoltaic system performance enhancement with non-tracking planar concentrators: experimental results and bi-directional reflectance function (bdrf) based modelling
  135. Impact of snow and ground interference on photovoltaic electric system performance
  136. Levelized cost of electricity for solar photovoltaic, battery and cogen hybrid systems
  137. Emerging economic viability of grid defection in a northern climate using solar hybrid systems
  138. Aquavoltaics: synergies for dual use of water area for solar photovoltaic electricity generation and aquaculture
  139. Belt-driven open source circuit mill using low-cost 3-d printer components
  140. Coal with carbon capture and sequestration is not as land use efficient as solar photovoltaic technology for climate neutral electricity production
  141. Open source low-cost power monitoring system
  142. Design and construction of 36w automatic solar street light using solar panel, charge controller, led and with battery
  143. Modeling of core loss in induction machine

HOW TO RECEIVE PROJECT MATERIAL(S)

After paying the appropriate amount (#5,000) into our bank Account below, send the following information to

08068231953 or 08168759420

(1)    Your project topics

(2)     Email Address

(3)     Payment Name

(4)    Teller Number

We will send your material(s) after we receive bank alert

BANK ACCOUNTS

Account Name: AMUTAH DANIEL CHUKWUDI

Account Number: 0046579864

Bank: GTBank.

OR

Account Name: AMUTAH DANIEL CHUKWUDI

Account Number: 3139283609

Bank: FIRST BANK

FOR MORE INFORMATION, CALL:

08068231953 or 08168759420

AFFILIATE LINKS:

myeasyproject.com.ng

easyprojectmaterials.com

easyprojectmaterials.net.ng

easyprojectsmaterials.net.ng

easyprojectsmaterial.net.ng

easyprojectmaterial.net.ng

projectmaterials.com.ng

googleprojectsng.blogspot.com

myprojectsng.blogspot.com.ng

https://projectmaterialsng.blogspot.com.ng/
https://foreasyprojectmaterials.blogspot.com.ng/
https://mypostumes.blogspot.com.ng/
https://myeasymaterials.blogspot.com.ng/
https://eazyprojectsmaterial.blogspot.com.ng/
https://easzprojectmaterial.blogspot.com.ng/

Leave a Reply

Your email address will not be published. Required fields are marked *